5 thoughts on “When new FW 10.01.xx1 for GL865 DUAL/QUAD will be released?”
It is released for GE865 and for V3 products long time ago…
And why AT-commands for 2G modules still include SELINT 0/1 modes if they are applicable for old modules only.
the stream file is available, you can request it to your distributor or ts-emea and upgrade your modules with XFP tool.
SELINT 0/1 is still supported to be backward compatible with all the customer that developed their firmware based on old Telit products GM862 / GE863 and moved to a new platform.
the stream file is available, you can request it to your distributor or ts-emea and upgrade your modules with XFP tool.
SELINT 0/1 is still supported to be backward compatible with all the customer that developed their firmware based on old Telit products GM862 / GE863 and moved to a new platform.
I am deveolper in Electroninvest – one of distributors for Bulgaria. Why stream files (for GL865-DUAL and GL865-QUAD) are not in Download Zone?
OK, if so you have to separate AT-commands document into two – one for SELINT 0/1 and second for SELINT 2.
Two more questions. How to check RAM memory usage? How many KB are available for user program in case tha all python modules are imported (worst case)?
Nikolay please email to ts-emea@telit.com from your distributor address.
I am deveolper in Electroninvest – one of distributors for Bulgaria. Why stream files (for GL865-DUAL and GL865-QUAD) are not in Download Zone?
[AG]: because we have not released any part number in production yet, but you can request the stream files to EMEA Tech support
OK, if so you have to separate AT-commands document into two – one for SELINT 0/1 and second for SELINT 2.
[AG]: We think having AT command description for SELINT0/1 and SELINT2 in a unique document is better for developers, also because there are commands that have the same behavior with all SELINT settings, and others (newest) that are only available for SELINT2
Two more questions. How to check RAM memory usage? How many KB are available for user program in case tha all python modules are imported (worst case)?
[AG]: it is not possible to read how much is the RAM used. Total RAM available is 1.2MB reserver for PY.
We use cookies to enhance your browsing experience and help us improve our websites. To improve our website, we carefully select third parties that use cookies to allow us to serve specific content and achieve the purposes set out in our cookie policy. For more information on how to make adjustments through your browser to the cookies being used on your device, please click Find Out More link. By closing this banner or continuing to browse our website, you agree to our use of such cookies. FIND OUT MORE
It is released for GE865 and for V3 products long time ago…
And why AT-commands for 2G modules still include SELINT 0/1 modes if they are applicable for old modules only.
the stream file is available, you can request it to your distributor or ts-emea and upgrade your modules with XFP tool.
SELINT 0/1 is still supported to be backward compatible with all the customer that developed their firmware based on old Telit products GM862 / GE863 and moved to a new platform.
I am deveolper in Electroninvest – one of distributors for Bulgaria. Why stream files (for GL865-DUAL and GL865-QUAD) are not in Download Zone?
OK, if so you have to separate AT-commands document into two – one for SELINT 0/1 and second for SELINT 2.
Two more questions. How to check RAM memory usage? How many KB are available for user program in case tha all python modules are imported (worst case)?
Nikolay please email to ts-emea@telit.com from your distributor address.
I am deveolper in Electroninvest – one of distributors for Bulgaria. Why stream files (for GL865-DUAL and GL865-QUAD) are not in Download Zone?
[AG]: because we have not released any part number in production yet, but you can request the stream files to EMEA Tech support
OK, if so you have to separate AT-commands document into two – one for SELINT 0/1 and second for SELINT 2.
[AG]: We think having AT command description for SELINT0/1 and SELINT2 in a unique document is better for developers, also because there are commands that have the same behavior with all SELINT settings, and others (newest) that are only available for SELINT2
Two more questions. How to check RAM memory usage? How many KB are available for user program in case tha all python modules are imported (worst case)?
[AG]: it is not possible to read how much is the RAM used. Total RAM available is 1.2MB reserver for PY.