Dear technical support team,
my customer has some problems using the Telit GC864-QUAD-V2.
/// ACD Elektronik GmbH
Tel.: (+49) 7392 / 708-469
Fax: (+49) 7392 / 708-58469
Description of the failure:
We have the Telit GSM module GC864 – QUAD V2 integrated with our devices. To communicate a TCP / IP connection to the control center ( internet PC ) is established. This control station sends commands to the device , which are then answered . Times of 0.5 – 2 seconds is normal. However, it sometimes occurs that remains " stuck" the response in the transmit buffer of the Telit module. After about 30 seconds, the computer stops communicating with a timeout . As an attachment ( Protocol.Zip ) I will send you a full recording of the serial interface: < Comucont_TEST_V24.txt
I’ve filtered out the non-relevant data in the file < Comucont_TEST_V24_Ausschnitt.txt > in the annex: -07:36: 22,775 TCP/IP connection -07:39: 53,190 Control Center (PC) starts the communication -Then-normal communication (maturities < 2 Seconds) – 07:41: 10,302 This 16-Byte "hang" in the Send Buffer 07:41: 46,469 control Center stopped Communication-> timeout
To explain : To receive data reports the modem ‘ SRING x, x’ , they are then ‘ AT # SRECV x = x’ read with the command. Then is sent with the command ‘ AT # SSEND = 1’ in binary response. The send progress is cyclical with the query ‘ AT # SI = 1’ checks ( the last parameter returns the number of characters in the transmit buffer). è In the transmission process , which was launched at 07:41:10,302 , is the number of characters in the transmit buffer for over 30 seconds = 16, ie Data has not been sent. è The communication is then aborted
Please contact the customer directly.
Many thanks for your time and support.
Hit enter to search or ESC to close
Knowledge Base & Download Zone