MUX Tool

7 thoughts on “MUX Tool

        1. Ok, I have downloaded and tried the application but it does not seems to be working for me. First time I run it, it pops config dialog with port selection, 

          after apply application create one port from configured 4 and just hangs (tried on 2 different PCs, one 32 one 64 bit). Also it is not possible to select where it will be installed… 

          1. Hi roman,

            can yopu please explain better your problem?

            MUX tool when run it appear for a while and then fall on application bar ( bottom on windows).

            To avoid this please edit the TSPMux.ini file ( located in the folder where MUX is installed ) and add the line DisableTrayIcon as below:

            [System]
            Top=479
            Left=31
            DisableTrayIcon=1

          2. Hi,

            So when I start the application I can see the icon in taskbar, but no application window is open, in device manager I can see  that the first port (COM2) was created but not the rest and after a while I get windows dialog saying that tspmux is not responding with options to close the app. or wait.

            This is my ini file, also I am using windows 10 if that could be related.. 

            [System]
            Top=479
            Left=31
            DisableTrayIcon=1
            [ChannelPh]
            ChnlType=RS232
            ChnlPort=COM1
            ChnlSpeed=38400
            CmuxDsrSensitivity=1
            CmuxIgnoreDtr=0
            [Channel0]
            ChnlType=VSERIAL
            ChnlPort=COM2
            ChnlServerMode=1
            [Channel1]
            ChnlType=VSERIAL
            ChnlPort=COM3
            ChnlServerMode=1
            [Channel2]
            ChnlType=VSERIAL
            ChnlPort=COM4
            ChnlServerMode=1
            [Channel3]
            ChnlType=VSERIAL
            ChnlPort=COM5
            ChnlServerMode=1