[SOL] Python debug with CMUX

One thought on “[SOL] Python debug with CMUX

  1. Are you using TelitSerialPortMux to debug Python?
    In this case the best way to do it is the following:

    1) Download all the script into the module and enable the main
    2) Start the TSPM, disable the Python checkbox (if enabled)
    3) Set #CMUXSCR, #STARTMODESCR to 0
    4) Close the main COM port and open one of the 3 virtual ports (#1, #2, #3) to exchange AT commands with the module.
    5) Open the #4 virtual COM port (Python debug)
    6) Send AT#EXECSCR to execute the script without shutting down the module.