Some embedded systems have registers to detect the reason for a script start, eg. watchdog timer reset, cold boot, hard reset, etc.
Is this possible to determine in Python script for a <strong style=
I don’t there is such utility in Python nor in command mode.
1) You may calculate the WatchDog (WD) timer reset by debugger. You have to send any message to UART when use MOD.watchdogReset(). If your module restarts early than WD timeout – promblem is in smth else.
2) Check power level and form of signal on oscillograph at the restart moment.
Hit enter to search or ESC to close
Knowledge Base & Download Zone