7 thoughts on “SIM detection issue with LE910 EU V2(RIL Integration of LE910 V2 on Eragon820)”
Dear Sir,
Please advise for the below issue…
We are interfacing LE910-V2 with Eragon 820 running android 6.0.1, we followed 1VV0301239_Telit_RIL_User_Guide_for_Android_OS integration guide.
Presently we are facing some issues.
1-After system boot up, on GUI its showing “****Unfortunately, the process com.android.phone has stopped*****” this message is keep repeating until we manually change to gsm/wcdma preferred network mode.
2- On GUI it’s showing No SIM card and it’s Symbol
please find the attached radio logs, telit_le910log21.log this is while its showing “****Unfortunately, the process com.android.phone has stopped*****, telit_le910log21_wcdma.log after manually changed to gsm.wcdma mode and build.prop
Hi, we are cheking your logs and we’ll be back to you soon.
Hi,
Awaiting for your feedback.
In the log telit_le910log21.log we can see many restarts of rild
RIL Daemon Started
and this should not happen, but it doesn’t seem something related to Telit library.
After first 2 restarts the library cannot write the response on the socket. Then an important line is missing:
but we do not see any specific issue related to the Telit RIL causing this malfunction. Among each restart the SIM is read and the module can register to the network.
We use cookies to enhance your browsing experience and help us improve our websites. To improve our website, we carefully select third parties that use cookies to allow us to serve specific content and achieve the purposes set out in our cookie policy. For more information on how to make adjustments through your browser to the cookies being used on your device, please click Find Out More link. By closing this banner or continuing to browse our website, you agree to our use of such cookies. FIND OUT MORE
Dear Sir,
Please advise for the below issue…
We are interfacing LE910-V2 with Eragon 820 running android 6.0.1, we followed 1VV0301239_Telit_RIL_User_Guide_for_Android_OS integration guide.
Presently we are facing some issues.
1-After system boot up, on GUI its showing “****Unfortunately, the process com.android.phone has stopped*****” this message is keep repeating until we manually change to gsm/wcdma preferred network mode.
2- On GUI it’s showing No SIM card and it’s Symbol
please find the attached radio logs, telit_le910log21.log this is while its showing “****Unfortunately, the process com.android.phone has stopped*****, telit_le910log21_wcdma.log after manually changed to gsm.wcdma mode and build.prop
Hi, we are cheking your logs and we’ll be back to you soon.
Hi,
Awaiting for your feedback.
In the log telit_le910log21.log we can see many restarts of rild
RIL Daemon Started
and this should not happen, but it doesn’t seem something related to Telit library.
After first 2 restarts the library cannot write the response on the socket. Then an important line is missing:
08-12 07:40:50.660 I/PHONE ( 1477): Creating GSMPhone
and we can see many references to CDMA. LE910 is not a CDMA device.
Other errors like
01-01 05:32:40.164 E/TelephonyPluginDelegate( 2946): Error loading TelephonyPlugin
are related to java.
In the second log telit_le910log21_wcdma.log the SIM is identified but also in that case there are many references to CDMA.
It could be a wrong global configuration of the phone. Please also verify that you have used all the settings for “Group 3” modules in the RIL.
Hi Andrea,
Thanks for your suggestions.
We have done all the settings according to “Group 3” modules in the RIL document.
We integrated the Telit LE910 EU V2 in a new Android 6.0 BSP, After integration, we are getting the same cdma related logs only.
Is there any specific configuration changes which have to be done, so that the android will detect the gsm instead of cdma.
Please find the logcat radio attached.
We have checked the global configuration also, but no idea why we are getting CDMA related stuff. Please advise ASAP.
Awaiting for your feedback.
Hi,