Need Help For LE70-868 RF Module. Wake up on Radio Functionality.

3 thoughts on “Need Help For LE70-868 RF Module. Wake up on Radio Functionality.

  1. Hello, Technical Team

    I’m Currently working on LE-70 868 RF Module Which have Firmware Version: GJ.S00.02.07-B002 , GJ.B00.01.0A. we have achieved low power mode using serial command method in Smart Repeater configuration and it’s working well. And now we are trying  to implement it’s another low power mode which is wake up radio in Smart Repeater configuration. But there are some issues in configuration.

    i have proceed this command sequence to implement it.

    • Configuration commands.
    1. +++                        (hyes mode)
    2. ATR             (Reset value)
    3. ATS202=12 (power output)
    4. ATS255=36 (network option)
    5. ATS220=10 (smart repeater mode)
    6. ATS300=1 (node configuration )
    7. ATS316=2 (node configuration )
    8. ATS240=3 (enable wake up radio)
    9. ATS240=3                  // wake on radio
    10. ATS243=5000           //cyclic wake up period  5 second
    11. ATS245=100             // wake on duration       100 millisecond
    12. ATS247=100             // standby timeout         100 millisecond
    13. ATO             (exit hyes mode)

    • To stand by Rf Module I’m trying this method but not going into stand by.
    • To stand by using serial command : ATP.
    • To stand by use Pin STB Active High

      Then, analysis and measurement of  current consumption of RF module constantly for half an hour but current consumption is 25 ma Constant not changing any value.

      Please Provide me some better solution to implement Wake up radio Feature.

      Thanks & Regards 
      Kalarav Parmar

    1. Dear Sir,

      Issue – LE70-868 module is not going in sleep mode. 

      What we want :- We want to use LE70-868 module in the wake on Radio made to save power. 

      Please refer below register setting, Let us know, what we did wrong.

      S200=0
      S201=3
      S202=12
      S204=8
      S206=12
      S207=0
      S209=0
      S210=5
      S211=8
      S212=1
      S213=1
      S214=5
      S216=2
      S217=43
      S220=1
      S221=0
      S223=2
      S226=0
      S227=0
      S228=255
      S240=7                        
      S243=5000
      S245=250
      S247=250
      S250=1
      S252=1
      S255=1
      S256=0
      S258=0
      S260=0
      S261=0
      S262=0
      S263=0
      S264=0
      S265=0
      S266=0
      S267=0
      S268=0
      S269=0
      S270=0
      S271=1
      S272=0
      S273=255
      S274=0
      S275=0
      S280=0000000000000000
      S296=0
      S300=0
      S301=0
      S302=0
      S303=0
      S304=0
      S305=0
      S306=0
      S307=0
      S308=0
      S309=0
      S310=0
      S311=0
      S312=0
      S313=0
      S314=0
      S315=0
      S316=0
      S317=0
      S318=0
      S319=0
      S320=0
      S321=0
      S322=0
      S323=0
      S324=0
      S325=0
      S326=0
      S327=0
      S328=0
      S329=0
      S330=0
      S331=0

      Thanks,

      Diwakar

    2. Hi,

      low power mode does not work in repeater mode

      please refer to note in user guide (attached picture).

      Hello, Technical Team

      I’m Currently working on LE-70 868 RF Module Which have Firmware Version: GJ.S00.02.07-B002 , GJ.B00.01.0A. we have achieved low power mode using serial command method in Smart Repeater configuration and it’s working well. And now we are trying  to implement it’s another low power mode which is wake up radio in Smart Repeater configuration. But there are some issues in configuration.

      i have proceed this command sequence to implement it.

      • Configuration commands.
      1. +++                        (hyes mode)
      2. ATR             (Reset value)
      3. ATS202=12 (power output)
      4. ATS255=36 (network option)
      5. ATS220=10 (smart repeater mode)
      6. ATS300=1 (node configuration )
      7. ATS316=2 (node configuration )
      8. ATS240=3 (enable wake up radio)
      9. ATS240=3                  // wake on radio
      10. ATS243=5000           //cyclic wake up period  5 second
      11. ATS245=100             // wake on duration       100 millisecond
      12. ATS247=100             // standby timeout         100 millisecond
      13. ATO             (exit hyes mode)

      • To stand by Rf Module I’m trying this method but not going into stand by.
      • To stand by using serial command : ATP.
      • To stand by use Pin STB Active High

        Then, analysis and measurement of  current consumption of RF module constantly for half an hour but current consumption is 25 ma Constant not changing any value.

        Please Provide me some better solution to implement Wake up radio Feature.

        Thanks & Regards 
        Kalarav Parmar