NE50-868 interface with SPI device

2 thoughts on “NE50-868 interface with SPI device

  1. Is it somehow possible to connect NE50-868 to a MEMS sensor device with SPI Interface.

    Could the PDI_DATA and PDI_CLK be used for this purpose?

    If not, for which purpose can I use PDI_DATD and PDI_CLK ?

    1. Hi,

      PDI_data, PDI_clk: they
      are the interfaces for the PDI debug (Atmel suggest to use JTAGICE mkII) and you can not use them for application.