LE70-915 sending continuous stream of 0x00’s

One thought on “LE70-915 sending continuous stream of 0x00’s

  1. We are playing with  a pair of LE70-915 modules as master/client (Send/receiver) and after a couple of seconds they do pair and data is transfered. After around 400mS the receiver outputs the last byte of a string, then adds 0x0D and a long string of 0x00’s, all of which was not sent by the transmitter. The transmitter is still running but the receiver is only outputting zeros.

     

    The setup string we use in the transmitter before we transfer data is below with the reply indented (carriage returns ommitted)

     

    +++

        OK

    AT/V

        GO.S01.01.01-B005

        GO.B00.01.0A

     ATS200?

        S200=0

    ATS201?

        S201=3

    ATS202?

        S202=0

    ATS209?

        S209=0

    ATS216?

        S216=0

    ATS224?

        S224=1

    ATO

        OK

     

    The receiver setup string is

    +++

        OK

    AT/V

        GO.S01.01.01-B005

        GO.B00.01.0A

     ATS200?

        S200=0

    ATS201?

        S201=3

    ATS202?

        S202=8

    ATS209?

        S209=0

    ATS216?

        S216=0

    ATS224?

        S224=0

    ATO

        OK

     

    Any ideas what is going on?

    Tim.