LE70-915 sending continuous stream of 0x00’s eronously

3 thoughts on “LE70-915 sending continuous stream of 0x00’s eronously

  1. We are playing with  a pair of LE70-915 modules as master/client
    (Send/receiver) and after a couple of seconds they do pair and data is
    transfered. After around 400mS the receiver outputs the last byte of a
    string, then adds 0x0D and a long string of 0x00’s, all of which was not
    sent by the transmitter. The transmitter is still running but the
    receiver is only outputting zeros.

     

    The setup string we use in the transmitter before we transfer data is below with the reply indented (carriage returns ommitted)

     

    +++

        OK

    AT/V

        GO.S01.01.01-B005

        GO.B00.01.0A

     ATS200?

        S200=0

    ATS201?

        S201=3

    ATS202?

        S202=0

    ATS209?

        S209=0

    ATS216?

        S216=0

    ATS224?

        S224=1

    ATO

        OK

     

    The receiver setup string is

    +++

        OK

    AT/V

        GO.S01.01.01-B005

        GO.B00.01.0A

     ATS200?

        S200=0

    ATS201?

        S201=3

    ATS202?

        S202=8

    ATS209?

        S209=0

    ATS216?

        S216=0

    ATS224?

        S224=0

    ATO

        OK

     

    Any ideas what is going on?

    Tim.

     

    1. Hi,

      do you have only 2 modules?

      otherwise could you set 1 module as Synchronizator and other 2 modules as Client?

      Let me know

      Thanks