LE70-868 radio ACK issue

2 thoughts on “LE70-868 radio ACK issue

  1. Dear Sir,

    I am using LE70-868 module in smart reapeter mode. i have three device that is :-

    Device_1   – COOR

    Device_2   – Repeater_1

    Device_3   –  Repeater_2

    My arrangement is COOR  —->  Repeater_1   —–> Repeater_2

    I want to send data from COOR to Repeater_1 and COOR to Repeater_2.

    Issue  :-  If i have switched off Repeater_2 and sending data from COOR to Repeater_2, COOR is responding “OK” instead of “ERROE”. 

    Below is my module config :- 

    COOR – 

    S200=0
    S201=3
    S202=20
    S204=8
    S206=6
    S207=0
    S209=0
    S210=5
    S211=8
    S212=1
    S213=1
    S214=5
    S216=2
    S217=43
    S220=10
    S221=0
    S223=2
    S226=0
    S227=0
    S228=255
    S240=0
    S243=1000
    S245=10
    S247=100
    S250=0
    S252=1
    S255=36
    S256=0
    S258=0
    S260=0
    S261=0
    S262=0
    S263=0
    S264=0
    S265=0
    S266=0
    S267=0
    S268=0
    S269=0
    S270=0
    S271=1
    S272=0
    S273=255
    S274=0
    S275=0
    S280=0000000000000000
    S296=0
    S300=1
    S301=0
    S302=0
    S303=0
    S304=0
    S305=0
    S306=0
    S307=0
    S308=0
    S309=0
    S310=0
    S311=0
    S312=0
    S313=0
    S314=0
    S315=0
    S316=2
    S317=0
    S318=0
    S319=0
    S320=0
    S321=0
    S322=0
    S323=0
    S324=0
    S325=0
    S326=0
    S327=0
    S328=0
    S329=0
    S330=0
    S331=0

    Repeater_1 :- 

    S200=0
    S201=3
    S202=0
    S204=8
    S206=6
    S207=0
    S209=0
    S210=5
    S211=8
    S212=1
    S213=1
    S214=5
    S216=2
    S217=43
    S220=11
    S221=0
    S223=2
    S226=0
    S227=0
    S228=255
    S240=0
    S243=1000
    S245=10
    S247=100
    S250=0
    S252=1
    S255=36
    S256=0
    S258=0
    S260=0
    S261=0
    S262=0
    S263=0
    S264=0
    S265=0
    S266=0
    S267=0
    S268=0
    S269=0
    S270=0
    S271=1
    S272=0
    S273=255
    S274=2
    S275=3
    S280=0000000000000000
    S296=0
    S300=0
    S301=0
    S302=0
    S303=0
    S304=0
    S305=0
    S306=0
    S307=0
    S308=0
    S309=0
    S310=0
    S311=0
    S312=0
    S313=0
    S314=0
    S315=0
    S316=0
    S317=0
    S318=0
    S319=0
    S320=0
    S321=0
    S322=0
    S323=0
    S324=0
    S325=0
    S326=0
    S327=0
    S328=0
    S329=0
    S330=0
    S331=0

    Thanks,

    Diwakar

    1. Hi

      it is a normal behaviour, 

      Smart Repeater uses radio ACK only at single hop level and does not provide a complete path acknowledgement, this is left to the user application responsibility if needed.

      So customer has to implement ACK in his application

      Best Regards,