LE70-868 module is not going in sleep mode

4 thoughts on “LE70-868 module is not going in sleep mode

  1. Diwakar Rajput wrote:
    >>>

    Dear Sir,

    Issue – LE70-868 module is not going in sleep mode. 

    What we want :- We want to use LE70-868 module in the wake on Radio made to save power. 

    Please refer below register setting, Let us know, what we did wrong.

    S200=0
    S201=3
    S202=12
    S204=8
    S206=12
    S207=0
    S209=0
    S210=5
    S211=8
    S212=1
    S213=1
    S214=5
    S216=2
    S217=43
    S220=1
    S221=0
    S223=2
    S226=0
    S227=0
    S228=255
    S240=7                        
    S243=5000
    S245=250
    S247=250
    S250=1
    S252=1
    S255=1
    S256=0
    S258=0
    S260=0
    S261=0
    S262=0
    S263=0
    S264=0
    S265=0
    S266=0
    S267=0
    S268=0
    S269=0
    S270=0
    S271=1
    S272=0
    S273=255
    S274=0
    S275=0
    S280=0000000000000000
    S296=0
    S300=0
    S301=0
    S302=0
    S303=0
    S304=0
    S305=0
    S306=0
    S307=0
    S308=0
    S309=0
    S310=0
    S311=0
    S312=0
    S313=0
    S314=0
    S315=0
    S316=0
    S317=0
    S318=0
    S319=0
    S320=0
    S321=0
    S322=0
    S323=0
    S324=0
    S325=0
    S326=0
    S327=0
    S328=0
    S329=0
    S330=0
    S331=0

    Thanks,

    Diwakar

    1. Hi

      I see you set HW-serial and wake up on radio low power.

      So if you set HW low power you have to set Stand by pin to VCC as described in the attached imaghe.

       

      1. Dear Sir,

        We want to run LE70-868 module in the wake on radio mode.

        Please let us know, what is the correct register setting.

        Thanks,

        Diwakar

        1. Hi

          I see you set HW-serial and wake up on radio low power.

          So if you set HW low power you have to set Stand by pin to VCC as described in the attached image.

          The attachment is two posts above.