I have a LE50-868 with Cyclic wake up period of 100mS ( Rx duration 3mS) in order to listen to incomming messages.
This works fine.
The STBY pin is normaly high i.e sleep mode.
Sometimes I want to send messages (5bytes). So I have Stand By mode R240=5.
With this scenario the module wakes it selves up every 100ms and I wake it up sometimes.
But after a number of transmissions I manage to freeze the module. The Tx pin stayes ON and the module does not respond to any data.
Can there be any collisions beetwen my toggeling of the STBY-pin the modules cyclic wake up? If I set R240=1 then there are no problems.
I put STBY pin low. waits for 350uS.I send data. I put STBY-pin high.
Hit enter to search or ESC to close
Knowledge Base & Download Zone