I have a ZE61 which was bought as a discreet module and a ZE51 which was bought combined with a USB dongle.
According to the Dongle Users Guide, it is programmed according to the Z-One Pro Protocol.
This is not quite true.
practice one has to program it using a set of AT commands that are only
described in the Telit_XE51_61_Test_Stack_Application_Note document.
What this does, in practice, is to map a sub-set of the Z-One Protocol to a set of Hayes type modem registers.
I can get 1 dongle to speak to another without any set up at all, they work out of the box.
The discreet ZE61 is indeed programmed via the Z-One Pro Protocol.
What I want to do is to get the ZE61 to speak to the ZE51 dongle.
That AT commands have nothing relating to networking, at best I can change the channel number.
SO, how is it done?
Hit enter to search or ESC to close
Knowledge Base & Download Zone