Home automation application on/off switch and light

6 thoughts on “Home automation application on/off switch and light

  1. Dear Sir,

    Please help to resolve issue.

    1. If we use endpoint 0xb as switch and 0xc as light , where these endpoint physically in module?
    2. How can I handle 240 Endpoint without external microcontroller?

    Best Regards,
    Diwakar Singh

      1. Module :- ZE61-2.4

        f/w

        Zex1pro_HEATCOOLUNIT_RO .S28
        Zex1_PRO_SWITCH_RO_S28
        Zex1_PRO_ONOFFLIGHT_RO.S28

        HA_SWITCH_Light_HCU_Package

        Regards,

        Diwakar

        1. Hi

          sorry but I did not understand question 1, may you describe better your request?

          Thanks

          about question 2, modules can be managed or via micro or via PC and terminal

          1. Dear Sir,

            In ZE61-2.4 module (F/w – Home Automation profile  HA (  0x0104))

            Device id 0x0000 (on/off Switch)

            and Device id 0x0001(On/off Output)    

            Which pins are used for (on/off Switch) and (On/off output) cluster id  0x0006.

             

            We are able to send data to module (COOR) and it is sending ACK message, but we are not able to see any physical activity at End device.

            Please let me know, how to test it and what the right procedure.

            Thanks,

            Diwakar

          2. Hi 

            could you describe me the behaviour you are following?

            Do you have demo kit?

            are you following instruction as user guide (attached)

            Thanks