HE910 hangs up in online mode

3 thoughts on “HE910 hangs up in online mode

  1. Connecting to a TCP end-point with AT#SD=1,0,80,"",255,1,1 works fine and returns OK, but connecting in online mode with AT#SD=1,0,80,"",255,1,0 hangs up the interface completely (no CONNECT received, no error messages).

    I’m using EVK2 with HE910 interface board and I’m connected via the USB B connector with a terminal. The board is powered by a DC power supply. I’m on the last firmware revision of the modem (12.00.006).

    Am I doing something wrong?