We are using HE910-G module. After send dialup command, we are getting NO CARRIER respond from module. Attached are the log file. Let me know, If i am doing some thing wrong.
Please let me know, If Telit has any document for connect with internet.
Please post in the appropriate section.
Probably your PPP session on host is not properly initiated, or flow control is not correctly set.
We are using hardware flow control.
Could you share PPP command sequence, So that we can move faster.
one other thing i abserve, When we are using TCM, We are able to ping module IP, But when we are geting IP using AT#SGACT=1,1. We are unable to ping.
Module’s PPP implementation is standard. What is your host?
We are using PC.
Definitelly PPP dialup with Windows and Linux is working with Telit modules.
Please share PPP protocal details, It realy help us to development.
Please understand there is nothing special in Telit PPP implementation so you can use any available PPP protocol documentation.
But I cannot understand why you would need this, mosty OS already have PPP implemented. Simply use it.
Hit enter to search or ESC to close
Knowledge Base & Download Zone