3G connection over PPP with UE910

3 thoughts on “3G connection over PPP with UE910

  1. Greetings,

    Is there an application note regarding, how to set up a PPP connection over 3G network? I have very little networking knowledge and I am not sure what type of connection I establish with the following commands;

    • AT+CGDCONT=1,”IP”,”internet”,”0.0.0.0″,0,0
    • ATD*99#

    Is it GPRS, is it UMTS? How do I know? Or is it even possible to make PPP connections for 3G or is it just limited to GPRS? We have a linux host machine and we want to make a 3G connection using the Linux stack.

    Kind regards,

    Mete

    1. There is a lot of documentation regarding Linux, PPP and cellular modems, configuration is depending of your specific distribution. Regarding 2G/3G network selection this is a module side matter employing use of AT+WS46 command. Also Take care of the involved network APN it might be different for 2G and 3G although this is not common.

      1. Hi Cosmin,

        Thank you very much, I missed the document with the AT+WS46 command. Now I figured out what network I am connecting to.

        Kind regards,

        Mete