Copy module config to another module

2 thoughts on “Copy module config to another module

  1. Hi all,

       I am working with GL865 QUAD in EVK 2 board. Everthing is all right. But in my application board some times the Network Disconnection or some ERROR’s are coming in the Trace port.

     

    But i am using the ASC0 Serial port to see the Trace output.

     

    I suspect the configuration in the Module of EVK may be differ from my Application board.

     

    If this is the case, How i can copy all the configurations from EVK board module to my application module.

     

    Thank you