I’m experiencing some difficulties with the startup delay before script starts executing. I’ve tried to use #STARTMODESCR=1,10 and #STARTMODESCR=0. It takes about 50 seconds before the script starts. I’ve used #STARTMODESCR=1,10 for GM862-GPS and it starts fine.
I have a script called main.py with content:
GPIO.setIOdir(17, 1, 1)
As soon as the script starts executing the pin rises. This takes unusually long (50sec) compared to GM862-GPS.
Any ideas what could cause this?
What module and firmware?
Are you using pre-compiled scripts? Please describe the structure of your application files.
Does the delay appear at each startup or only first time after app files upload?
Can you provide a small example which shows such a considerable startup difference?
Thanks for quick reply,
It turns out that my main.py was actually the problem. Got it to drop at 30sec, which is around same as with GM862-GPS.
My debug class with four lines was too much 🙂 Fixed it by making startmain.py script, which only imports main.py (which is precompiled to pyo-file using PC).
Thanks for the update Markus, good you sorted out.
Hit enter to search or ESC to close
Knowledge Base & Download Zone