HTTP Server

13 thoughts on “HTTP Server

  1. Hi,

     

    I am using the GE-863-Pro with linux and I detected that the apache was already installed.

     

    But
    I can not find the apache directory. Telit has any document that
    describe were is the apache directory? And what are the steps to upload a
    webpage to the device? 

     

    Best Regards,

    João Casaleiro

    1. To detect the  “apache directory” use the command : “find . -name httpd”

       

      # find . -name httpd

      ./usr/sbin/httpd

      ./home/httpd

       

       Sites are located in htdocs directory right?

       

      1. Hi Cosmin,

         

        Tank you for your reply.

         

        I tried the command and the result was in fact the two folders. But I search inside the folders and didn’t find any .html files or web page related files. In fact, normally the sites are in htdocs.

         

         I find other folder with a sugestive name /var/www. Inside was the Telit GE863-PRO3 default webpage. I copy my webpage folder to that directory and it works. Is this the correct procedure?

         

         Other issue is about the ethernet PHYsical IC. I am using the EVK GE863-PRO3 (which has the DAVICOM Ethernet PHY IC  DM9161AEP). But after development the final board will have the Micrel (KZ8001L) PHY IC with MII interface. Is it necessary to install a new linux device driver if I use a different PHY IC?  

         

         Best Regards,

        João Casaleiro.

  2. Hi Cosmin,

    Tank you for your reply.

    I tried the command and the result was in fact the two folders. But I search inside the folders and did not find any .html files or web page related files. In fact, normally the sites are in htdocs.

     I find other folder with a sugestive name /var/www. Inside was the Telit GE863-PRO3 default webpage. I copy my webpage folder to that directory and it works. Is this the correct procedure?

     Other issue is about the ethernet PHYsical IC. I am using the EVK GE863-PRO3 (which has the DAVICOM Ethernet PHY IC  DM9161AEP). But after development the final board will have the Micrel (KZ8001L) PHY IC with MII interface. Is it necessary to install a new linux device driver if I use a different PHY IC? 

     Best Regards,
    João Casaleiro.

    1. Right João, /var/www is the correct place, thank you for remembering. For the Ethernet driver I think you should check with the Linux community the support for the exact chip, connection modes and look into Telit provided sources for the software driver presence.

       

       

      1. Cosmin,

         

        Tanks for your support.

         

        I’ll post the results about the device driver for Micrel chip .

         

        Best Regards,

        João Casaleiro.

  3. Hi Cosmin,

     

    I already load the website on Colinux and everything was ok.(The apache is intalled on the Colinux not on the GE-863-Pro)

     

    Now I want to load the page to the GE-863-Pro. But no http server is installed. Is the apache 2 suitable? What http server do you recomend? 

     

    Best Regards,

    João Casaleiro. 

          1. Hi Again,

             

            Ok, I already put the website on the /var/www. But when I put on the web browser http:/192.168.121.3  I get the response "404 Not Found      The requested URL was not found on this server."

             

            But the server is running, right? But for some reason the server can return the webpage.

             

             

             

          2. Check httpd.conf file.

            I think this is rather a question about Linux support here, check relevant places first, but let us know maybe we still have an idea.

             

          3. I think /home/httpd is the root directory of the website, try to put the files there.