7 thoughts on “Problem with NE868 master hangs in serial”
Hi
i have a problem with my master, it hangs after aprox 600k packetes.
i have to reset the master on the pin to get the serial up running agian.
its running 3.16 and i only have 4 nodes.
Romano says:
Hi,
could you give me more info:
module setting
are you using Telit demokit or your application?
are you using flow control?
test description
Thanks
sure modul setting (register nr = setting )
Cordinator:
202=7
214=255
306= 2
307=3
310=42
315=48
316=48
320=148
321=17
322=0
323=4
324=11
330=2
332=1
333=0
340=0
345=0
346=0
347=0
My system consists of 5 units, 1 cordinator and 3 endpoint + 1 endpoint/router.
Each endpoint makes one packed of data every 10 sec, and transmits it to the cordinator, the cordinatoer never sends anything, only resives. the resived serial data going into a computer.
Im using Flow control but since that system only sendes to a computer i doubt that is the problem, and to fix my problem i only have to reset the cordinator.
Thanks for the help:-)
Hi,
how many data you sent every 10 sec?
which is Router setting? did you try to increase base time and super frame duration?
each endpoint sends 1 packed of 105bytes, every 10sec, they are not synced individual so that they don´t all send at the same time.
Router have same setting as cordinator.
Have not tried to increse the super frame duration.
Hi,
I created a network with
1 coord
3 router.
I’m using default setting.
I changed only:
ATS214 (SET TO 255) and payload (ats330=2
I’m sending a package of 110 bytes and Coord works well.
Could you try the same my setting please?
Hi
i can try that but how do i change that with the network running, getting to each of the radio moduls is hard:-(
but if i change it it will take 4-6 weeks to get the result.
We use cookies to enhance your browsing experience and help us improve our websites. To improve our website, we carefully select third parties that use cookies to allow us to serve specific content and achieve the purposes set out in our cookie policy. For more information on how to make adjustments through your browser to the cookies being used on your device, please click Find Out More link. By closing this banner or continuing to browse our website, you agree to our use of such cookies. FIND OUT MORE
Hi
i have a problem with my master, it hangs after aprox 600k packetes.
i have to reset the master on the pin to get the serial up running agian.
its running 3.16 and i only have 4 nodes.
sure modul setting (register nr = setting )
Cordinator:
202=7
214=255
306= 2
307=3
310=42
315=48
316=48
320=148
321=17
322=0
323=4
324=11
330=2
332=1
333=0
340=0
345=0
346=0
347=0
My system consists of 5 units, 1 cordinator and 3 endpoint + 1 endpoint/router.
Each endpoint makes one packed of data every 10 sec, and transmits it to the cordinator, the cordinatoer never sends anything, only resives. the resived serial data going into a computer.
Im using Flow control but since that system only sendes to a computer i doubt that is the problem, and to fix my problem i only have to reset the cordinator.
Thanks for the help:-)
each endpoint sends 1 packed of 105bytes, every 10sec, they are not synced individual so that they don´t all send at the same time.
Router have same setting as cordinator.
Have not tried to increse the super frame duration.
Hi
i can try that but how do i change that with the network running, getting to each of the radio moduls is hard:-(
but if i change it it will take 4-6 weeks to get the result.