3 thoughts on “Need Help For LE70-868 RF Module. Wake up on Radio Functionality.”
Hello, Technical Team
I’m Currently working on LE-70 868 RF Module Which have Firmware Version: GJ.S00.02.07-B002 , GJ.B00.01.0A. we have achieved low power mode using serial command method in Smart Repeater configuration and it’s working well. And now we are trying to implement it’s another low power mode which is wake up radio in Smart Repeater configuration. But there are some issues in configuration.
i have proceed this command sequence to implement it.
Configuration commands.
+++ (hyes mode)
ATR (Reset value)
ATS202=12 (power output)
ATS255=36 (network option)
ATS220=10 (smart repeater mode)
ATS300=1 (node configuration )
ATS316=2 (node configuration )
ATS240=3 (enable wake up radio)
ATS240=3 // wake on radio
ATS243=5000 //cyclic wake up period 5 second
ATS245=100 // wake on duration 100 millisecond
ATS247=100 // standby timeout 100 millisecond
ATO (exit hyes mode)
To stand by Rf Module I’m trying this method but not going into stand by.
To stand by using serial command : ATP.
To stand by use Pin STB Active High
Then, analysis and measurement of current consumption of RF module constantly for half an hour but current consumption is 25 ma Constant not changing any value.
Please Provide me some better solution to implement Wake up radio Feature.
Thanks & Regards Kalarav Parmar
Dear Sir,
Issue – LE70-868 module is not going in sleep mode.
What we want :- We want to use LE70-868 module in the wake on Radio made to save power.
Please refer below register setting, Let us know, what we did wrong.
please refer to note in user guide (attached picture).
Hello, Technical Team
I’m Currently working on LE-70 868 RF Module Which have Firmware Version: GJ.S00.02.07-B002 , GJ.B00.01.0A. we have achieved low power mode using serial command method in Smart Repeater configuration and it’s working well. And now we are trying to implement it’s another low power mode which is wake up radio in Smart Repeater configuration. But there are some issues in configuration.
i have proceed this command sequence to implement it.
Configuration commands.
+++ (hyes mode)
ATR (Reset value)
ATS202=12 (power output)
ATS255=36 (network option)
ATS220=10 (smart repeater mode)
ATS300=1 (node configuration )
ATS316=2 (node configuration )
ATS240=3 (enable wake up radio)
ATS240=3 // wake on radio
ATS243=5000 //cyclic wake up period 5 second
ATS245=100 // wake on duration 100 millisecond
ATS247=100 // standby timeout 100 millisecond
ATO (exit hyes mode)
To stand by Rf Module I’m trying this method but not going into stand by.
To stand by using serial command : ATP.
To stand by use Pin STB Active High
Then, analysis and measurement of current consumption of RF module constantly for half an hour but current consumption is 25 ma Constant not changing any value.
Please Provide me some better solution to implement Wake up radio Feature.
We use cookies to enhance your browsing experience and help us improve our websites. To improve our website, we carefully select third parties that use cookies to allow us to serve specific content and achieve the purposes set out in our cookie policy. For more information on how to make adjustments through your browser to the cookies being used on your device, please click Find Out More link. By closing this banner or continuing to browse our website, you agree to our use of such cookies. FIND OUT MORE
Hello, Technical Team
I’m Currently working on LE-70 868 RF Module Which have Firmware Version: GJ.S00.02.07-B002 , GJ.B00.01.0A. we have achieved low power mode using serial command method in Smart Repeater configuration and it’s working well. And now we are trying to implement it’s another low power mode which is wake up radio in Smart Repeater configuration. But there are some issues in configuration.
i have proceed this command sequence to implement it.
Then, analysis and measurement of current consumption of RF module constantly for half an hour but current consumption is 25 ma Constant not changing any value.
Please Provide me some better solution to implement Wake up radio Feature.
Thanks & Regards
Kalarav Parmar
Dear Sir,
Issue – LE70-868 module is not going in sleep mode.
What we want :- We want to use LE70-868 module in the wake on Radio made to save power.
Please refer below register setting, Let us know, what we did wrong.
S200=0
S201=3
S202=12
S204=8
S206=12
S207=0
S209=0
S210=5
S211=8
S212=1
S213=1
S214=5
S216=2
S217=43
S220=1
S221=0
S223=2
S226=0
S227=0
S228=255
S240=7
S243=5000
S245=250
S247=250
S250=1
S252=1
S255=1
S256=0
S258=0
S260=0
S261=0
S262=0
S263=0
S264=0
S265=0
S266=0
S267=0
S268=0
S269=0
S270=0
S271=1
S272=0
S273=255
S274=0
S275=0
S280=0000000000000000
S296=0
S300=0
S301=0
S302=0
S303=0
S304=0
S305=0
S306=0
S307=0
S308=0
S309=0
S310=0
S311=0
S312=0
S313=0
S314=0
S315=0
S316=0
S317=0
S318=0
S319=0
S320=0
S321=0
S322=0
S323=0
S324=0
S325=0
S326=0
S327=0
S328=0
S329=0
S330=0
S331=0
Thanks,
Diwakar
Hi,
low power mode does not work in repeater mode
please refer to note in user guide (attached picture).