LE910 hang after change band

4 thoughts on “LE910 hang after change band”

  1. Dear All,

    I catch a problem while try to send a sort of commands to our LE910-EUG FW 17.01.522, Such that it hang and could not repond to any AT Command.

    I was trying to change the band after de reigter from netrwork, the back to select the network using autmoatic COPS command but it hangs and tried with manula COPS command but it failed.

    Attached the log file for testing.

    BR,

    Khaled

    1. AT commands have published timeout values, +COPS timeout is 125 seconds. Try to wait longer for module’s answers.

      1. AT commands have published timeout values, +COPS timeout is 125 seconds. Try to wait longer for module’s answers.

        I waited for more than 20 min without send any command after +COPS and module hanged.

        with following squence:

        ATE1
        OK
        AT+CGSN
        359852050016261

        OK
        AT#CIMI
        #CIMI: 602022168159425

        OK
        AT+CCID
        ERROR
        AT#BND=?
        #BND: (0),(0,2,5,6,8,9,12,16,18,20),(80044)

        OK
        AT#BND?
        #BND: 0,5,80044

        OK
        AT+CGMI
        Telit

        OK
        AT+CGMM
        LE910-EUG

        OK
        AT+CGMR
        17.01.522

        OK
        AT#BND?
        #BND: 0,5,80044

        OK
        AT+Cops?
        +COPS: 2

        OK
        AT+Cops=0
        OK
        AT+Cops?
        +COPS: 0,0,”Vodafone”,2

        OK
        AT#BND?
        #BND: 0,5,80044

        OK
        AT+Cops=2
        OK
        AT+Cops?
        +COPS: 2

        OK
        AT#BND?
        #BND: 0,5,80044

        OK
        AT#BND=0,0
        OK
        AT+Cops?
        +COPS: 1

        OK
        AT+CREQ?
        ERROR
        AT+CREG?
        +CREG: 0,0

        OK
        AT+Cops?
        +COPS: 1

        OK
        AT+Cops=0

        After that it hanged more than 20 minut till restart without send any command after that

        BR,

        Khaled