3 thoughts on “LE70-915 sending continuous stream of 0x00’s eronously”
We are playing with a pair of LE70-915 modules as master/client
(Send/receiver) and after a couple of seconds they do pair and data is
transfered. After around 400mS the receiver outputs the last byte of a
string, then adds 0x0D and a long string of 0x00’s, all of which was not
sent by the transmitter. The transmitter is still running but the
receiver is only outputting zeros.
The setup string we use in the transmitter before we transfer data is below with the reply indented (carriage returns ommitted)
+++
OK
AT/V
GO.S01.01.01-B005
GO.B00.01.0A
ATS200?
S200=0
ATS201?
S201=3
ATS202?
S202=0
ATS209?
S209=0
ATS216?
S216=0
ATS224?
S224=1
ATO
OK
The receiver setup string is
+++
OK
AT/V
GO.S01.01.01-B005
GO.B00.01.0A
ATS200?
S200=0
ATS201?
S201=3
ATS202?
S202=8
ATS209?
S209=0
ATS216?
S216=0
ATS224?
S224=0
ATO
OK
Any ideas what is going on?
Tim.
Hi,
do you have only 2 modules?
otherwise could you set 1 module as Synchronizator and other 2 modules as Client?
Let me know
Thanks
I will find a second module and setup as a client and see if both do the same.
We use cookies to enhance your browsing experience and help us improve our websites. To improve our website, we carefully select third parties that use cookies to allow us to serve specific content and achieve the purposes set out in our cookie policy. For more information on how to make adjustments through your browser to the cookies being used on your device, please click Find Out More link. By closing this banner or continuing to browse our website, you agree to our use of such cookies. FIND OUT MORE
We are playing with a pair of LE70-915 modules as master/client
(Send/receiver) and after a couple of seconds they do pair and data is
transfered. After around 400mS the receiver outputs the last byte of a
string, then adds 0x0D and a long string of 0x00’s, all of which was not
sent by the transmitter. The transmitter is still running but the
receiver is only outputting zeros.
The setup string we use in the transmitter before we transfer data is below with the reply indented (carriage returns ommitted)
+++
OK
AT/V
GO.S01.01.01-B005
GO.B00.01.0A
ATS200?
S200=0
ATS201?
S201=3
ATS202?
S202=0
ATS209?
S209=0
ATS216?
S216=0
ATS224?
S224=1
ATO
OK
The receiver setup string is
+++
OK
AT/V
GO.S01.01.01-B005
GO.B00.01.0A
ATS200?
S200=0
ATS201?
S201=3
ATS202?
S202=8
ATS209?
S209=0
ATS216?
S216=0
ATS224?
S224=0
ATO
OK
Any ideas what is going on?
Tim.
I will find a second module and setup as a client and see if both do the same.