I am testing the HE836
module. Unfortunately, I cannot use all the AT commands which
are available in the documentation. I get only an ERROR returned. I have this
problem e.g. with the following commands:
What could be the problem? Any ideas?
Please report firmware version, AT+CGMR, set AT+CMEE=2 for more informative errors.
The AT+CMEE=2 command was accepted but I get no additional error messages.
Is still a newer firmware available?
You need to update the module with the latest official firmware for HE863-EUG, 11.00.011.
Please, write an email to firstname.lastname@example.org to request it.
Thanks a lot!
Hit enter to search or ESC to close
Knowledge Base & Download Zone