HE-910-nag GPSP error

10 thoughts on “HE-910-nag GPSP error

  1. The error does not note any additional information. The module i am using is the HE910-NAG with firmware 12.00.314.

    AT$GPSPNVRAM=15,2
    ERROR
    AT$GPSNVRAM=15,0
    ERROR
    AT$GPSRST
    OK
    AT$GPSNVRAM=15,0
    ERROR
    AT$GPSACP
    $GPSACP:

    OK
    AT$GPSNMUN=1,1,0,0,0,0,0
    OK
    AT$GPSP=1
    ERROR
    The module will not turn on.

     

    Eric 

  2. Yes it say’s peration not allowed.

    at+cmee=2
    OK
    at$gpsp=1
    +CME ERROR: operation not allowed

    I have ten chips prior that work perfectly. The new set i ordered will not let me power the gps module on. Is there another function that controls that part of the module.

     

    Thanks

    Eric