Consider situation in which I get this bug.
When receiver place incoming call on hold caller receives #ECAM urc with state hold (#ECAM: 0,4,1,,,). And there is nothing wrong. But when receiver releases held incoming call and it becomes active again, caller should receive #ECAM with call status active (#ECAM: 0,3,1,,,), but caller receives #ECAM with call status hold again.
It seems to be a bug…
Please provide a log Dmitry.
what we need is an RTD trace log. Do you have access to AUX port on module?
Unfortunately currently I don’t have ability to use AUX port.
it looks hard to understand…
Sometimes this can be related to operator…
Without a log I can help you so much
But AT+CLCC shows that in fact state of the current call is active (and that is really true) and #ECAM provides wrong information.
If it was related to operator, AT+CLCC would provide us the same information about state of the call as #ECAM.
I don’t get why you need such a log. It is easy to reproduce this bug. Or when you are reproducing it you don’t get such a problem?
a new FW will be available in the short time to improvbe this behaviour
OK, thanks for reply! Waiting for new firmware.
Fixed in B012! Thanks!
Thank you for noticing Dmitry!
Hit enter to search or ESC to close
Knowledge Base & Download Zone