Copy module config to another module

2 thoughts on “Copy module config to another module”

1. Hi all,

      I am working with GL865 QUAD in EVK 2 board. Everthing is all right. But in my application board some times the Network Disconnection or some ERROR’s are coming in the Trace port.

    

   But i am using the ASC0 Serial port to see the Trace output.

    

   I suspect the configuration in the Module of EVK may be differ from my Application board.

    

   If this is the case, How i can copy all the configurations from EVK board module to my application module.

    

   Thank you

    

    

   1. I don’t know other means than doing it by hand.