CE910-Dual Module MDN programming issue with Aeris firmware

2 thoughts on “CE910-Dual Module MDN programming issue with Aeris firmware”

1. Dear Sir,

   We are programming MDN in Telit CE910-Dual Module (Aeris firmware) which MEID is “xxxxx0459E28B2“

   As per data provided by Aeris network, its IMSI no. should be “xxxxx9136747389“.

   But module is returning different IMSI no. which is “xxxxx4073805106“.

   We have checked all another Telit CE910-Dual Modules (Aeris firmware) in which IMSI no. provided by Aeris network and programmed in modules are different against their MEID.

   Please let me know, what is the issue.

   Thanks,

   Diwakar 

   1. Dear Diwakar,

      I think you need to check your provisioning procedure.

      You can read the IMEI after provisioning.

      Please contact him. Then you can get a guide in detail.

      Thanks,