I have found a strange behavior when operating my LE910 (EUG and NAG with Fw 523 and 503).
First of all, here is the log :
AT+CGMR 17.00.523
OK AT+COPS? +COPS: 2
OK AT+WS46? +WS46: 25
OK AT+WS46=28 OK AT+WS46=25 OK AT+WS46=25 OK AT+COPS=0 OK
AT+WS46=25 OK AT+COPS=2 OK AT+WS46? +WS46: 25
OK AT+WS46=28 ERROR AT+WS46? +WS46: 28
OK AT+WS46=25 ERROR AT+WS46? +WS46: 25
OK
As you can see, when I am in +COPS:2 (which is what I want as I need to set #BND, +CEMODE, +WS46, … before scanning the network) I am able to send the AT+WS46 command if, and only if, the +COPS:2 state is set when the chip reboots.
If I set AT+COPS=2 command and then use the AT+WS46 command, the latter returns an error but the value seems to be set.
Is it a normal behavior ?
Thank you
This issue is indeed reproducible.
However, although you receive an ERROR, you can see that the new value is accepted and stored in the module by issuing the READ command (AT+WS46?).
In addition, we have a new FW version 17.01.522.2 in which this issue is not reproducible. Please tell us if you need it.
Hi all,
I have found a strange behavior when operating my LE910 (EUG and NAG with Fw 523 and 503).
First of all, here is the log :
As you can see, when I am in +COPS:2 (which is what I want as I need to set #BND, +CEMODE, +WS46, … before scanning the network) I am able to send the AT+WS46 command if, and only if, the +COPS:2 state is set when the chip reboots.
If I set AT+COPS=2 command and then use the AT+WS46 command, the latter returns an error but the value seems to be set.
Is it a normal behavior ?
Thank you