GE910 UART and USB HelloWorld printouts

2 thoughts on “GE910 UART and USB HelloWorld printouts”

1. Hi

   The sample programs HelloWorld from AppZoneSampleApp(UART) or AppZoneSampleApp(USB) compiled using gcc and “Telit – IoT AppZone IDE 2.1.4” IDE,  downloaded into RB900 from TELEORIGION generates problem with PrintToUart and PrintToUsb functions as follows:
   1. firmware version “streamGE910-AZ-13.00.007.bin”:
   ? PrintToUart works fine
   ? PrintToUsb does not generate any prints in hyperterminal connected with the device using Telit Mobile (USB1) (COMx) or Telit Mobile (USB2) (COMy) or Telit Mobile Modem (COMz)
   2. firmware version “streamGE910-AZ-13.00.008-B021.bin”:
   ? PrintToUart nor PrintToUsb does not generate any prints in hyperterminal

   Any idea what am I doing wrong?

   1. Hi

      The sample programs HelloWorld from AppZoneSampleApp(UART) or AppZoneSampleApp(USB) compiled using gcc and “Telit – IoT AppZone IDE 2.1.4” IDE,  downloaded into RB900 from TELEORIGION generates problem with PrintToUart and PrintToUsb functions as follows:
      1. firmware version “streamGE910-AZ-13.00.007.bin”:
      ? PrintToUart works fine
      ? PrintToUsb does not generate any prints in hyperterminal connected with the device using Telit Mobile (USB1) (COMx) or Telit Mobile (USB2) (COMy) or Telit Mobile Modem (COMz)
      2. firmware version “streamGE910-AZ-13.00.008-B021.bin”:
      ? PrintToUart nor PrintToUsb does not generate any prints in hyperterminal

      Any idea what am I doing wrong?

      Hello, Telit IoT AppZone IDE 2.1.4 is supposed to be used with 13.00.xx8 stable firmware versions. you can find the correct firmware here:

      https://tcloud.telit.com/public.php?service=files&t=81da0ee1f2a54d8db4a328bc74c740cc

      Best Regards

      Fabio Pintus